A first build sounds like a project, and with Kelvin it is closer to an afternoon. The Modular Keyboard Kit arrives with the machined case, tuned plate and hot-swap board ready for your switches and keycaps, and there is no soldering at all. We suggest allowing about 45 minutes, which leaves room to enjoy it rather than race it.
Begin by choosing the board you will live with. The kit comes in 65%, 75% or tenkeyless, in Silver, Graphite, Walnut or Champagne, and the price is the same for every combination. The case is bead-blasted 6063 aluminum with an anodized finish, the weight plate is brass, and the plate sits on a foam-damped gasket mount.
Choose the parts the kit leaves out
The kit leaves out switches and keycaps on purpose, because those are the parts that decide how the board feels. The hot-swap board takes any 3-pin or 5-pin switch. If you want a smooth, even stroke, start with the Smooth Linear Switch, and order a few extra in different spring weights to test before you commit to a full set. If you want a deliberate answer under the finger, the Hot-Swap Tactile Switch has a rounded bump you can feel without hearing, and the Silent Mechanical Switch is the one for a shared desk.
Change your mind as often as you like. That is what hot-swap is for.
Lay everything out before you press a single switch. Press each one in straight, then check that no leg has bent under the board. Screw-in stabilizers are included for the long keys. If you would like a different stem color for the space bar, the Modular Connector Piece comes in Cocoa Brown, Cream or Moss Green, and one round of lube is enough to stop a rattle for good.
A few small tools make the afternoon easier. The Ergonomic Keycap Puller lifts caps straight up with no scratches on the stem, and the Ergonomic Desk Tool Set gathers a keycap puller, switch puller, tweezers and a soft brush in one fitted case. Already own a case? The Modular Keyboard Parts Set holds the hot-swap PCB, a plate, stabilizers and the screws, and it pairs with a frame.
If a switch is not what you hoped for, there is no penalty for trying. Unopened parts return free within 30 days, and the 30-day switch swap lets you change a switch for another weight or type. When the build is done, wipe the case with a dry microfiber cloth and keep it away from solvents.











